Turbo red block -10 oil return conversion kit

Installed this part a couple of weeks ago with the PTFE hose and changed the oil cooler lines at the same time. The car has no signs of leaks from the new hoses, just have to fix the other leaks as well. Made sure to have the part in the freezer with the freezer set it it's lowest setting. For the install; even though I covered the hole as well as possible, I still flushed the area as well as I could with a long funnel and some cheap oil with the drain plug out. My only small gripe is that I got two fittings and a brush, but no sealant/locking fluid. No matter, I just happened to have some loctite 271 on hand and I don't plan on removing the part in the foreseeable future.Sean (17 Aug 2023, 17:32)

The product is very well thought out and executed. The install can be a little tricky if you dont plan on removing a bunch of parts. Shrink within the freezer for a few hours before you tap it in and it will be good to go. Thanks again.Justin Kramer (20 May 2019, 18:07)

Got this sent over to the UK as there was nothing like this available. It fits perfectly and sits tight with no leaks. I followed the instructions and it was a breeze to fit as long as the throwback arm is removed. I've recently changed the hose fitting and it never moved from the block so seems to be a very secre fit. Very impressed.Mark Traill (16 Jun 2017, 15:04)

Fits nice and tight, just follow the instructions and put it in your freezer before your going to hammer it in. Perfect if your not wanting to tap your block.David Beum (2 Jan 2016, 14:25)

Follow the instructions to the tee and installation will be breeze. I installed this fitting on a 760, one tip is to remove oil filter re-locator arm to have enough room to hammer the fitting into the block. First time around there was not enough room to hammer. This fitting is ideally what you need if you have upgraded your turbo to a 15g/16t. I ordered the Teflon hose and fittings for the oil return/turbo side from Kingugawa(good prices and quick shipping). I would recommend this fitting to anyone who is tired of dealing with hard line pipe for the oil return.Hermilo Martinez (15 Aug 2015, 09:29)