Zeitronix zt-2 Wideband o2 sensor with (black) LCD bundle

Product Information

Zt-2 Specs

• 0.1 AFR accuracy
• Operating voltage 10V to 18V
• Switching power supply for oxygen sensor heater
• Precise sensor temperature control
• Reverse polarity protection
• Integrated self resettable fuse
• Positive lock connectors
• Protected inputs and outputs
• Flexible Plug and Play Sensor Harness with a small, easy to route through the fire wall, connector
• Wideband Oxygen Sensor included
• Easy to install plug and play kit
• Adjustable Narrowband Switching Point
• Warning Alarms and Triggers

Inputs/Outputs:

• Bosch Wideband O2 sensor Input
• Linear Wideband Output AFR = Volts * 2 + 9.6
• Serial data output to the Zeitronix LCD, ZR-1 AFR, and ZR-2 Multi-Gauge Displays
• Serial data output for real time datalogging (PC laptop required)
• RPM Input (tachometer,  primary side ignition coil, crank, cam sensor).
  The RPM input  works in any car and any ignition system. No additional adapters needed!
• Simulated and adjustable Narrowband Output to feed a stock ECU
• Throttle Position Sensor Input
• Boost (MAP) Sensor Input:
  - 50 PSI (3.5 Bar) MAP Sensor, or 75 PSI (5.0 Bar) MAP sensor or
   150 PSI (10 Bar) MAP sensor
• Exhaust Gas Temperature (EGT) probe Input
• User1 Input:
  - 0-5 volt analog input.  Voltage data is viewable on all models of the LCD display.
    Software support for the display of Zeitronix pressure sensors.
  - Customized data conversions can be entered to match 0-5 volt sensor specifications.
    All converted User1 data values are displayed only in the software.
• User2 Input:
  - 0-5 volt analog input  OR  configurable to be used with Fuel/Oil/Boost pressure sensors and Air/Water/Oil/Transmission temperature sensors.
  - Data is displayed on the 2010 Model LCD and ZR-2 Multi-gauge as a pressure or temperature.
  - Zeitronix Data Logger software will display and log data according to sensor type.
  - Customized data conversions can be entered to match 0-5 volt sensor specifications.
    Customized data conversion values are displayed in the Zeitronix Data Logger software only.
• Warning Output for use with ZAVT-1 warning/trigger box
• 5V output for sensors

Product Code: ZEIZX37310